74LVC1G18

1-of-2 non-inverting demultiplexer with 3-state deselected

output

Rev. 4 — 20 January 2022

Product data sheet

1. General description

The 74LVC1G18 is a 1-to-2 demultiplexer with 3-state outputs. The device buffers the data on input

A and passes it to output 1Y or 2Y, depending on whether the state of the select input (S) is LOW

or HIGH. The unused output assumes the high impedence OFF-state. Inputs can be driven from

either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed

3.3 V and 5 V environments.

Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.

This device is fully specified for partial power down applications using IOFF. The IOFF circuitry

disables the output, preventing the potentially damaging backflow current through the device when

it is powered down.

2. Features and benefits

• Wide supply voltage range from 1.65 V to 5.5 V

• Overvoltage tolerant inputs to 5.5 V

• High noise immunity

• ±24 mA output drive (VCC = 3.0 V)

• CMOS low power dissipation

• Latch-up performance exceeds 250 mA

• Direct interface with TTL levels

• IOFF circuitry provides partial Power-down mode operation

• Complies with JEDEC standard:

• JESD8-7 (1.65 V to 1.95 V)

• JESD8-5 (2.3 V to 2.7 V)

• JESD8C (2.7 V to 3.6 V)

• JESD36 (4.5 V to 5.5 V)

• ESD protection:

• HBM EIA/JESD22-A114E exceeds 2000 V

• MM EIA/JESD22-A115-A exceeds 200 V.

• Specified from -40 to +85 °C and -40 to +125 °C.

3. Ordering information

Table 1. Ordering information

Package

Type number

Temperature range Name

Description

Version

74LVC1G18GW

-40 °C to +125 °C

TSSOP6

plastic thin shrink small outline package; 6 leads;

body width 1.25 mm

SOT363-2

74LVC1G18GV

-40 °C to +125 °C

SC-74; TSOP6 plastic surface-mounted package; 6 leads

SOT457