1 / 2 page
LED Highly-Diffused Lights (75 mm)
†
These models are not stocked and are non-returnable.
Printed in USA
05/01
P/N 67442
LED Highly-Diffused Light Models
25.8 mm
(1.02")
138.4 mm
(5.45")
75 mm
(2.95")
Light Aperture
77.0 mm
(3.03)
M6 x 1.0
6.4 (0.25") DEEP (4x)
12.7 mm
(0.50")
12.7 mm
(0.50")
25.4 mm
(1.00")
25.4 mm
(1.00")
25.4 mm
(1.00")
See
Table
82.6 mm
(3.25")
75 mm
(2.95")
Light Aperture
Models
Illumination
Type
Color
Cable
Supply
Voltage
Supply
Current
Connections
LEDRS75N†
Continuous
highly-diffused
light
Red 640 nm
0.5 m (18")
terminated
with 9-pin
D-sub
connector
(male pins)
12V dc ±10%
with voltage
regulation of ±1%
980 mA max.
Pin 1 = +V fan
Pin 2 = dc common fan
Pin 3 = dc common
Pin 4 = +V
Power supply model
PSA-12(E) or
PS2V-12(E)
is recommended
(see other side)
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover
damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Features
• Designed to minimize surface textures and elevation changes, while providing
uniform illumination over the field of view
• 59 mm x 75 mm light aperture
• The suggested field of view is 38 mm in diameter and the suggested stand off is 25 mm
• Black anodized aluminum housing
Environmental Rating
IEC IP20; NEMA 1
Operating Conditions
Temperature: 0° to 40°C (+32° to 104°F)
Maximum relative humidity: 95% at 40°C (non-condensing)
Useful Life
Green model: 50,000 hours; Red models: 60,000 hours.
Note: actual useful life of strobed lights depends on duty cycle
Green 530 nm
LEDRS75N-S†
Strobed
highly-diffused
light
Red 640 nm
24V dc ±10%
with voltage
regulation of ±1%
7.0 A max.
1 ms pulse
Pin 4 or 5 = +V
Pin 1 or 6 = dc common
Use strobe control
module model SCM
(see other side)
LEDGS75N†
1.0 A max.
1.8 m (6')
terminated
with 9-pin
D-sub
connector
(male pins)
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
