74HC174; 74HCT174

Hex D-type flip-flop with reset; positive-edge trigger

Rev. 6 — 1 September 2021

Product data sheet

1. General description

The 74HC174; 74HCT174 are hex positive edge-triggered D-type flip-flops with individual data

inputs (Dn) and outputs (Qn). The common clock (CP) and master reset (MR) inputs load and reset

all flip-flops simultaneously. The D-input that meets the set-up and hold time requirements on the

LOW-to-HIGH clock transition is stored in the flip-flop and appears at the Q output. A LOW on MR

causes the flip-flops and outputs to be reset LOW. Inputs include clamp diodes. This enables the

use of current limiting resistors to interface inputs to voltages in excess of VCC.

2. Features and benefits

• Wide supply voltage range from 2.0 to 6.0 V

• CMOS low power dissipation

• High noise immunity

• Input levels:

• For 74HC174: CMOS level

• For 74HCT174: TTL level

• Six edge-triggered D-type flip-flops

• Asynchronous master reset

• Complies with JEDEC standards

• JESD8C (2.7 V to 3.6 V)

• JESD7A (2.0 V to 6.0 V)

• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

• ESD protection:

• HBM JESD22-A114F exceeds 2000 V

• MM JESD22-A115-A exceeds 200 V.

• Multiple package options

• Specified from -40 °C to +85 °C and -40 °C to +125 °C.

3. Ordering information

Table 1. Ordering information

Package

Type number

Temperature range Name

Description

Version

74HC174D

74HCT174D

-40 °C to +125 °C

SO16

plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

74HC174PW

74HCT174PW

-40 °C to +125 °C

TSSOP16 plastic thin shrink small outline package; 16 leads;

body width 4.4 mm

SOT403-1