| 전자부품 데이터시트 검색엔진 |
|
CDB5378 데이터시트(PDF) 52 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CDB5378 데이터시트(HTML) 52 Page - Cirrus Logic |
|
52 / 72 page ![]() CDB5378 52 DS639DB3 3.5.6 Customize The Customize sub-panel sends commands to upload custom FIR and IIR filter coefficients, start the dig- ital filter, stop the digital filter and write/read custom EEPROM configuration files to the on-board boot EE- PROM. Example data files are included in a sub-directory of the software installation. 3.5.7 External Macros Macros are generated within the Macros sub-panel on the Control panel. Once a macro has been built it can either be saved with a unique macro name to be run within the Macros sub-panel, or saved as an external macro and be associated with one of the External Macro buttons. A macro is saved as an External Macro by saving it in the ./macros/ subdirectory using the name ‘m1.mac’, ‘m2.mac’, etc. Depending on the selected name the macro will be associated with the corre- sponding External Macro button M1, M2, etc. • M1 = . /macros/m1.mac • M2 = . /macros/m2.mac •etc. External Macro buttons can be re-named on the panel by right clicking on them. The button name will- change, but the macro associated with that button is always saved as ‘m1.mac’, ‘m2.mac’, etc., in the ./macros/ subdirectory. The External Macro button names are stored in the file ‘Mnames.txt’, also in the ./macros/ subdirectory. External Macros allow up to eight macros to be accessed quickly without having to load them into the Mac- ros sub-panel on the Control panel. These External Macros operate independently of the Macros sub- panel and are not affected by operations within it, except when a macro is saved to the ./macros/ subdi- rectory to replace a currently existing External Macro. Control Description Load FIR Coef Write a set of FIR coefficients into the digital filter from a file. Load IIR Coef Write a set of IIR coefficients into the digital filter from a file. Start Filter Enables the digital filter by sending the Start Filter command. Stop Filter Disables the digital filter by sending the Stop Filter command. Write EEPROM Writes an EEPROM boot configuration file to the EEPROM memory. Verify EEPROM Verifies EEPROM memory against an EEPROM boot configuration file. Control Description M1 - M8 Runs the External Macro associated with that button. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |