| 전자부품 데이터시트 검색엔진 |
|
CS53L21 데이터시트(PDF) 46 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS53L21 데이터시트(HTML) 46 Page - Cirrus Logic |
|
46 / 66 page ![]() 46 DS700PP1 CS53L21 ADCX High-Pass Filter Freeze (ADCX_HPFRZ) Default: 0 0 - Continuous DC Subtraction 1 - Frozen DC Subtraction Function: The high-pass filter works by continuously subtracting a measure of the DC offset from the output of the decimation filter. If the ADCx_HPFRZ bit is taken high during normal operation, the current value of the DC offset is frozen, and this DC offset will continue to be subtracted from the conversion result. For DC mea- surements, this bit must be set to ‘1’. See “ADC Digital Filter Characteristics” on page 14. Soft Ramp CHX Control (SOFTX) Default: 0 0 - Disabled 1 - Enabled Function: Soft Ramp allows level changes to be implemented via an incremental ramp. ADCx_ATT[7:0] digital atten- uation changes are ramped from the current level to the new level at a rate of 0.125 dB per LRCK period. PGAx_VOL[4:0] gain changes are ramped in 0.5 dB steps every 16 LRCK periods. Soft Ramp & Zero Cross Enabled When used in conjunction with the ZCROSSx bit, the PGAx_VOL[4:0] gain changes will occur in 0.5 dB steps and be implemented on a signal zero crossing. Zero Cross CHX Control (ZCROSSX) Default: 0 0 - Disabled 1 - Enabled Function: Zero Cross Enable dictates that signal level changes will occur on a signal zero crossing to minimize audible artifacts. The requested level change will occur after a timeout period of 1024 sample periods (approximate- ly 10.7 ms at 48 kHz sample rate) if the signal does not encounter a zero crossing. The zero cross function is independently monitored and implemented for each channel. Soft Ramp & Zero Cross Enabled When used in conjunction with the SOFTx bit, the PGAx_VOL[4:0] gain changes will occur in 0.5 dB steps and be implemented on a signal zero crossing. The ADC Attenuator ADCx_ATT[7:0] is not affected by the ZCROSSx bit. SOFTx ZCROSSx Analog PGA Volume (PGAx_VOL[4:0]) Digital Attenuator (ADCx_ATT[7:0]) 00 Volume changes immediately. Volume changes immediately. 01 Volume changes at next zero cross time. Volume changes immediately. 10 Volume changes in 0.5 dB steps. Change volume in 0.125 dB steps. 11 Volume changes in 0.5 dB steps at every signal zero-cross. Change volume in 0.125 dB steps. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |