전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

M63160J 데이터시트(PDF) 13 Page - Renesas Technology Corp

부품명 M63160J
상세설명  STEPPING MOTOR DRIVER
PDF  18 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  RENESAS [Renesas Technology Corp]
홈페이지  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

M63160J 데이터시트(HTML) 13 Page - Renesas Technology Corp

Back Button M63160J Datasheet HTML 9Page - Renesas Technology Corp M63160J Datasheet HTML 10Page - Renesas Technology Corp M63160J Datasheet HTML 11Page - Renesas Technology Corp M63160J Datasheet HTML 12Page - Renesas Technology Corp M63160J Datasheet HTML 13Page - Renesas Technology Corp M63160J Datasheet HTML 14Page - Renesas Technology Corp M63160J Datasheet HTML 15Page - Renesas Technology Corp M63160J Datasheet HTML 16Page - Renesas Technology Corp M63160J Datasheet HTML 17Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 13 / 18 page
background image
M63160J
Rev.1.1, May.21.2004, page 13 of 17
Motor control functional explanation
1, Blank Time
A Mask time setup of the recovery current generated in Motor ON Timing is performed.
2, Off Time
The Motor OFF time after Itrip is set up.
3, Fast Decay Time
Fast Decay time in Mixed Decay Mode is set up.
(invalid at the time of Slow Decay and External PWM)
4, Sync.Rect
4-1, Active :FET is all turned off by current zero among Decay.
4-2, Passive :Reverse current is passed to a Vref setting value,and FET is all turned off after that.
Conditions1 :Internal PWM
⋅Sync.Rect.EnableControl1 “H ”⋅Mixed Decay Mode
State1 :Only the inside of Fast Decay is effective.
(When not reaching into Fast Decay at the above- mentioned setting value,it moves Slow Decay)
Conditions2 :External PWM
⋅Sync.Rect.EnableControl1 “H ”⋅Fast Decay Mode
5, Sync.Rect.Enable
5-1, Disabled :Sync.Rect.EnableControl1 “L ”
→Decay by the external diode is performed.
5-2, Enabled :Sync.Rect.EnableControl1 “H ”
→Decay with an internal transistor is performed.
6, Word Select
The taking- in place of serial data is set up (OUT1,OUT2,OUT1/OUT2).
7, Internal PWM
Decay is set up.
Decay Mode :Mixed /Slow
Mixed Decay :Fast Decay to Slow Decay
8, External PWM
A Decay setup at the time of the external control by EN terminal
Decay Mode :Fast /Slow
9, Phase Control
The direction to which current flows is set up.
Reverse: Phase B
→ Phase A
Forward: Phase A
→ Phase B
10, DAC
The current which FET passes is set up.
Itrip is set up.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com