The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend

accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-3 -

ENVIRONMENTAL

Item

Requirement

Test Condition

Vibration

No abnormal.

Contact Resistance:

100mΩ Max.

Discontinuity:

1 microsecond Max.

(EIA-364-28)

Amplitude:1.52mm P-P or 1.47mm/s^2

Sweep time:10~55~10Hz in 20 minutes

Duration:12 time in each (total of 36 times)

Electrical: DC 100 mA current

Load shall be flowed during the test

Thermal Shock

No abnormal.

Contact Resistance:

100mΩ Max.

(EIA 364-32 I)

Subject mated connectors should be tested

according to the condition listed below:

Temperature: -25 to 85°C

Cycles: 5 cycles

Exposure time at temp. Extremes: 30 minutes.

Salt Spray

No abnormal.

Subject mated connectors to 24 hours Min. at 35°C

with 5%-Salt-solution concentration.

Humidity

No abnormal.

(EIA 364-31)

Mate a dummy card and expose to 60±2°C for 96

hours Relative humidity 90.Upon completion of the

exposure period, the test specimens shall be

conditioned at ambient room conditions for 1 to 2

hours, after which the specified measurements

shall be performed

Heat Resistance

No abnormal.

(EIA 364-17 )

Mate a dummy card and expose to 70±2°C for

96Hr Upon completion of the exposure period, the

test specimens shall be conditioned at ambient

room conditions for 1 to 2Hr, after which the

specified measurements shall be performed.