PESDXUSB30_SER

All information provided in this document is subject to legal disclaimers.

© N

experia B.V. 2016. All rights reserved.

Product data sheet

Rev. 2 — 26 April 2016

10 of 19

Nexperia

PESDxUSB30 series

ESD protection for differential data lines

7.

Application information

The device is designed to provide high-level ESD protection for differential high-speed

data line pairs such as:

• USB 3.1

• HDMI 2.0

• Transition-Minimized Differential Signaling (TMDS)

• DisplayPort

• external Serial Advanced Technology Attachment (eSATA)

• Low Voltage Differential Signaling (LVDS)

When designing the PCB, give careful consideration to impedance matching and signal

coupling. Do not connect the protected signal lines to unlimited current sources like, for

example, a battery.

Since the SuperSpeed TX/RX lines are separated by GND or VBUS from the Hi-Speed

lines, PESD1USB30 makes it easy to achieve same signal lengths, straight routing, and

optimal positioning for ESD protection directly at the connector.

Fig 14. Application diagram: protecting the differential data lines of a USB Type-C

connector evaluation dongle with PESD1USB30