전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

UPD72012 데이터시트(PDF) 36 Page - Renesas Technology Corp

부품명 UPD72012
상세설명  MOS INTEGRATED CIRCUIT
PDF  38 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  RENESAS [Renesas Technology Corp]
홈페이지  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

UPD72012 데이터시트(HTML) 36 Page - Renesas Technology Corp

Back Button UPD72012 Datasheet HTML 30Page - Renesas Technology Corp UPD72012 Datasheet HTML 31Page - Renesas Technology Corp UPD72012 Datasheet HTML 32Page - Renesas Technology Corp UPD72012 Datasheet HTML 33Page - Renesas Technology Corp UPD72012 Datasheet HTML 34Page - Renesas Technology Corp UPD72012 Datasheet HTML 35Page - Renesas Technology Corp UPD72012 Datasheet HTML 36Page - Renesas Technology Corp UPD72012 Datasheet HTML 37Page - Renesas Technology Corp UPD72012 Datasheet HTML 38Page - Renesas Technology Corp  
Zoom Inzoom in Zoom Outzoom out
 36 / 38 page
background image
34
Data Sheet S13918EJ3V0DS
µPD72012
5. RECOMMENDED SOLDERING CONDITIONS
The
µPD72012 should be soldered and mounted under the following recommended conditions. For the details of
the recommended soldering conditions, refer to the document Semiconductor Device Mounting Technology
Manual (C10535E).
For soldering methods and conditions other than those recommended below, contact your NEC sales
representative.
Surface mount type soldering conditions
µµµµPD72012GB-XXX-3B4: 44-pin plastic QFP (10 ×××× 10)
Soldering Method
Soldering Conditions
Recommended
Condition Code
Infrared reflow
Peak package temperature: 235
°C, Time: 30 sec. max. (210°C min.), Count: three
times or less
IR35-00-3
VPS
Peak package temperature: 215
°C, Time: 40 sec. max. (200°C min.), Count: three
times or less
VP15-00-3
Wave soldering
Solder bath temperature: 260
°C max., Time: 10 sec. max., Count: once,
Preheating temperature: 120
°C max. (package surface temperature)
WS60-00-1
Pin partial heating
Pin temperature: 300
°C max., Time: 3 sec. max. (per device side)
–
Caution
Avoid using different soldering methods together. (However, the pin partial heating method is
excluded.)
Through-hole type soldering conditions
µµµµPD72012CU-XXX: 42-pin plastic SDIP (15.24 mm (600))
Soldering Method
Soldering Conditions
Wave soldering (pins
only)
Solder bath temperature: 260
°C max., Time: 10 sec. max.
Pin partial heating
Pin temperature: 300
°C max., Time: 3 sec. max. (per pin)
Caution
Apply wave soldering only to the pins, and exercise care that solder does not directly contact
the package.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com