L6730BTR datasheet(21/52 Pages) STMICROELECTRONICS

부품명	L6730BTR

상세설명	Adjustable step-down controller with synchronous rectification

PDF	52 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

21 / 52 page

L6730 - L6730B

Device description

21/52

5.8

Monitoring and protection

The output voltage is monitored by the FB pin. If it is not within ±10% (typ.) of the programmed

value, the Power-Good (PGOOD) output is forced low. The PGOOD signal can be delayed by

adding an external capacitor on PGDelay pin (see Table 3: Pins connection and Figure 13.);

this can be useful to perform cascade sequencing. The delay can be calculated with the

following formula:

The device provides over voltage protection: when the voltage sensed on FB pin reaches a

value 20% (typ) greater than the reference, the low-side driver is turned on. If the OVP not-

latched mode has been set the low-side MOSFET is kept on as long as the overvoltage is

detected (see Figure 14.).The OVP latched-mode has been set the low-side MOSFET is turned

on until VCC is toggled (see Figure 15.). In case of latched-mode OVP the OSC pin is forced

high (4.5V typ) if an over voltage is detected.

Figure 13. PGOOD signal

()

PGDelay

⋅

= 5

2ms/Div.

PGOOD

L6730BTR 데이터시트(PDF) 21 Page - STMicroelectronics