STR730FZ1T7 datasheet(38/53 Pages) STMICROELECTRONICS

부품명	STR730FZ1T7

상세설명	ARM7TDMI 32-bit MCU with Flash, 3x CAN, 4 UARTs, 20 timers, ADC, 12 comm. interfaces

PDF	53 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

38 / 53 page

Electrical parameters

STR73xF

38/53

sample. This test conforms to the EIA/JESD 78 IC latch-up standard. For more details,

refer to the application note AN1181.

●

DLU: Electro-Static Discharges (one positive then one negative test) are applied to

each pin of 3 samples when the micro is running to assess the latch-up performance in

dynamic mode. Power supplies are set to the typical values, the oscillator is connected

as near as possible to the pins of the micro and the component is put in reset mode.

This test conforms to the IEC1000-4-2 and SAEJ1752/3 standards. For more details,

refer to the application note AN1181.

Electrical Sensitivities

Notes:

Class description: A Class is an STMicroelectronics internal specification. All its limits are higher than the

JEDEC specifications, that means when a device belongs to Class A it exceeds the JEDEC standard. B

Class strictly covers all the JEDEC criteria (international standard).

Symbol

Parameter

Conditions

Class 1)

Static latch-up class

TA=+25°C

TA=+85°C

TA=+105°C

DLU

Dynamic latch-up class

VDD=5.5V, fOSC4M=4MHz, fMCLK=32MHz, TA=+25°C

STR730FZ1T7 데이터시트(PDF) 38 Page - STMicroelectronics