5B Series 16 Channel Backplane

5B02

Rev. 0

Information furnished by Analog Devices is believed to be accurate and reliable.

However, no responsibility is assumed by Analog Devices for its use, nor for any

infringements of patents or other rights of third parties that may result from its use.

Specifications subject to change without notice. No license is granted by implication

or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective companies.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

www.analog.com

Fax: 781.326.8703

© 2005 Analog Devices, Inc. All rights reserved.

FEATURES

Mix and Match 5B Series I/O Module Capability

Factory Mutual (FM) Approved

Approved for Use in Class I, Division2, Groups A, B, C, and D

Locations.

CE Certified: EMC Directive in Heavy Industrial Applications

1500 V rms Channel/Channel and Input/Output Isolation

16- channels

Single Threaded Insert for module Hold Down

APPLICATIONS

Industrial Signal Conditioning

Industrial Signal Isolation

Industrial Signal Filtering

PRODUCT OVERVIEW

To address diverse applications, the 5B Series includes a family

of backplanes and mounting cards which provide a complete

signal conditioning solution. The 16-channel backplane can be

mounted in a 19” x 3.5” panel space, providing an economical

means to handle signals.

FUNCTIONAL BLOCK DIAGRAM

Figure 1 5B02 Functional Block Diagram

This backplane provides four screw terminals per channel for

all field connections. These connections satisfy all transducer

inputs, process current outputs and provide transducer

excitation when necessary. A cold junction temperature sensor

(model AC1361) sensor is also supplied on each channel to

accommodate thermocouple input modules. A pair of pin

sockets permits installation of the AC1362 current sensing

resistor used with the 5B32 current input module on the 16-

channel backplane, a 26-pin system interface connector

provides high level I/O for all channels. The 5B02 Series

backplane requires a regulated +5VDC external power source.