전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

ES9039MSPRO 데이터시트(PDF) 10 Page - ESS Technology,Inc

부품명 ES9039MSPRO
상세설명  32-bit High-Performance 8-Channel DAC
PDF  95 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  ESS [ESS Technology,Inc]
홈페이지  http://www.esstech.com
Logo ESS - ESS Technology,Inc

ES9039MSPRO 데이터시트(HTML) 10 Page - ESS Technology,Inc

Back Button ES9039MSPRO Datasheet HTML 6Page - ESS Technology,Inc ES9039MSPRO Datasheet HTML 7Page - ESS Technology,Inc ES9039MSPRO Datasheet HTML 8Page - ESS Technology,Inc ES9039MSPRO Datasheet HTML 9Page - ESS Technology,Inc ES9039MSPRO Datasheet HTML 10Page - ESS Technology,Inc ES9039MSPRO Datasheet HTML 11Page - ESS Technology,Inc ES9039MSPRO Datasheet HTML 12Page - ESS Technology,Inc ES9039MSPRO Datasheet HTML 13Page - ESS Technology,Inc ES9039MSPRO Datasheet HTML 14Page - ESS Technology,Inc Next Button
Zoom Inzoom in Zoom Outzoom out
 10 / 95 page
background image
ES9039MPRO & ES9039PRO Product Brief
CONFIDENTIAL ADVANCE INFORMATION 0.2.1
ESS TECHNOLOGY, INC. 109 Bonaventura Drive, San Jose, CA 95134, USA Tel (408) 643-8800 • WWW.ESSTECH.COM
10
Hardware Mode
The ES9039MPRO & ES9039PRO has 32 pre-configured modes that can be set with external pin configuration. These modes configure the DAC for
different input serial data rates and set the DAC muting.
These modes are set with pins:
MODE (Pin 23)
HW0 (Pin 21)
HW1 (Pin 22)
HW2 (Pin 40)
MUTE_CTRL (Pin 41)
Each hardware mode pin has 4 states:
0 – Pin directly connected to GND
1 – Pin directly connected to AVDD
Pull 0 – Pin pulled to GND through 47kΩ resistor
Pull 1 – Pin pulled to AVDD through 47kΩ resistor
Design Information
Each hardware mode pin can be configured with either a pull-up or pull-down resistor. Therefore, it is important that the pin is configured to allow for
the desired hardware modes. Some guidelines include the following:
The HW0 and HW1 pins never require a pull up or pull-down resistor.
HW2/
MODE
AVDD or GPIO
47k
HW2/
MODE
47k
Pull-up
Pull-down
GND or GPIO
Figure 2 – Hardware mode pin configurations
Muting
MUTE_CTRL (Pin 41) is used to control the muting of the output and enabling of the Automute feature while in Hardware Mode:
0 – Output Muted, No Automute
1 – Output Unmuted, No Automute
Pull 0 – Output Muted, Automute Enabled
Pull 1 – Output Unmuted, Automute Enabled



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com