RNBD451 datasheet(13/67 Pages) MICROCHIP

13 / 67 page

RNBD451

Electrical Characteristics

and its subsidiaries

Advance Information Data Sheet

DS70005514A-page 13

Electrical Characteristics

4.1

Absolute Maximum Electrical Characteristics

Exposure to these maximum rating conditions for extended periods may affect device reliability. Functional operation

of the device at these or any other conditions above the parameters indicated in the operation listings of this

specification is not implied.

Table 4-1. Absolute Maximum Ratings

Parameter

Value

Ambient temperature under bias(1, 2)

-40°C to +85°C

Storage temperature

-65°C to +150°C

Voltage on VDD / VDDIO with respect to GND

-0.3V to +4.0V

Voltage on pins, with respect to GND

-0.3V to (VDD + 0.3V)

Maximum current out of GND pins

300 mA

Maximum current into VDD pins(2)

300 mA

Maximum output current sourced/sunk by any Low Current Mode I/O pin (4x

drive strength)

10 mA

Maximum output current sourced/sunk by any High Current Mode I/O pin (8x

drive strength)

15 mA

Maximum current sink by all ports

120 mA

Maximum current sourced by all ports(2)

120 mA

ESD Qualification

Human Body Model (HBM) per JESD22-A114

2000V

Charged Device Model (CDM) (ANSI/ESD STM 5.3.1)…(All pins/Corner pins)

+500V/-500V

Notes:

Stresses above those listed under “Absolute Maximum Ratings” can cause permanent damage to the device.

This is a stress rating only and functional operation of the device at those or any other conditions above

those indicated in the operation listings of this specification is not implied. Exposure to maximum rating

conditions for extended periods may affect device reliability.

Maximum allowable current is a function of device maximum power dissipation (See the Thermal Operating

Conditions table in the Thermal Specifications from Related Links).

4.2

DC Electrical Characteristics

Table 4-2. Operating Frequency VS. Voltage

Param. No.

VDDIO, VDDANA Range

Temp. Range (in °C)

Max. MCU Frequency

Comments

DC_5

1.9V to 3.6V

-40°C to +85°C

64 MHz

Industrial

Note: The same voltage must be applied to VDDIN and VDDANA.

RNBD451 데이터시트(PDF) 13 Page - Microchip Technology

RNBD451 데이터시트(HTML) 13 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

데이터시트 다운로드

링크 URL