PRODUCT INFORMATION

MULTI-STANDARD SC 2.2

Norm references / Approvals

Multi-standard cables have conductor strands with nominal sizes in mm² or AWG/kcmil. The master size is mentioned in the

table below, while the equivalent size of the other system can be found in the Appendix T16 of this catalogue. For this related

secondary size the cross-section of the conductor mostly works out to be greater than the

specified nominal value.

Cable type certifications: <HAR> H07V2-K acc. EN 50525-2-31, UL AWM

style 10269 (by UL acc. UL standard UL 758, U.I. Lapp GmbH's UL AWM file number: E63634), (UL) MTW (by UL acc. UL

standard UL 1063, U.I. Lapp GmbH's (UL) MTW

file number: E198296), CSA TEW (by CSA acc.

CSA standard CSA C22.2 No. 127, CSA class 5835-01)

Product Make-up

Fine-wire strand made of tinned-copper wires

Special PVC-based core insulation

Technical Data

Classification:

ETIM 5.0 Class-ID: EC000993

ETIM 5.0 Class-Description: Single core cable

Conductor stranding:

Fine wire according to VDE 0295 Class 5/ IEC 60228 Class 5

Minimum bending radius:

OD ≤ 8 mm: 4 x OD*/2 x OD**;

8 < OD ≤ 12 mm: 5 x OD*/3 x OD**;

OD > 12 mm: 6 x OD*/4 x OD**

Nominal voltage:

HAR / IEC: U0/U: 450/750 V;

UL (AWM): U: 1000 V;

UL (MTW): U: 600 V;

CSA (TEW): U: 600 V

Temperature range:

Fixed installation:

HAR/IEC: -40°C to +90°C;

UL (AWM): -40°C to +105°C;

UL (MTW): -40°C to +90°C;

CSA (TEW): -40°C to +105°C

Note

Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon

request.

Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related

surcharges.

Packaging size: Coil ≤ 30 kg, otherwise drum

Photographs are not to scale and do not represent detailed images of the respective products.

* Prices are net prices without VAT and surcharges. Sale to business customers.

Non-harmonsided, nominal cross-sections: 0.5 mm², 0.75 mm², 1 mm², 16 mm², 50 mm², 70 mm², 95 mm², 120 mm²

*for conventional use, **for careful bending; "OD" = outer diameter

The outer diameters stated in the part number table are maximum values.

Last Update (13.01.2017)

2 / 4

©2017 Lapp Group - Technical changes reserved

Product Management www.lappkabel.de

You can find the current technical data in the corresponding data sheet.

PN 0456 / 02_03.16