Absolute Maximum Ratings*

2

AT25F4096

2454G–SFLSH–5/06

The AT25F4096 is enabled through the Chip Select pin (CS) and accessed via a 3-wire

interface consisting of Serial Data Input (SI), Serial Data Output (SO), and Serial Clock

(SCK). All write cycles are completely self-timed.

Block Write protection for top 1/8, top 1/4, top 1/2 or the entire memory array is enabled

by programming the status register. Separate write enable and write disable instructions

are provided for additional data protection. Hardware data protection is provided via the

WP pin to protect against inadvertent write attempts to the status register. The HOLD

pin may be used to suspend any serial communication without resetting the serial

sequence.

Figure 1. Block Diagram

Operating Temperature....................................–40

°C to +85°C

*NOTICE:

Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or any

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affect

device reliability.

Storage Temperature .....................................–65

°C to +150°C

Voltage on Any Pin

with Respect to Ground .................................... –1.0V to +5.0V

Maximum Operating Voltage ............................................ 4.2V

DC Output Current........................................................ 5.0 mA

524,288 x 8