| 전자부품 데이터시트 검색엔진 |
|
ATMEGA406_0607 데이터시트(PDF) 26 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATMEGA406_0607 데이터시트(HTML) 26 Page - ATMEL Corporation |
|
26 / 263 page ![]() 26 2548E–AVR–07/06 ATmega406 7.1.5 Voltage ADC Clock – clk VADC The Voltage ADC is provided with a dedicated clock domain. This allows halting the CPU and I/O clocks in order to reduce noise generated by digital circuitry. This gives more accurate ADC conversion results. 7.1.6 Coulomb Counter ADC Clock - clk CCADC The Coulomb Counter ADC is provided with a dedicated clock domain. This allows operating the Coulomb Counter ADC in low power modes like Power-save for continuous current measurements. 7.1.7 Watchdog Timer and Battery Protection Clock The Watchdog Timer and Battery Protection are provided with a dedicated clock domain. This allows operation in all modes except Power-off. It also allows very low power operation by utiliz- ing an Ultra Low Power RC Oscillator dedicated to this purpose. 7.2 Clock Sources The device has the following clock sources. The clocks are input to the AVR clock generator, and routed to the appropriate modules. 7.3 Calibrated Fast RC Oscillator The calibrated Fast RC Oscillator by default provides a 4.0 MHz clock, which is divided down to 1.0 MHz to all modules except the TWI. The frequency is nominal value at 25 °C. This clock will operate with no external components. During reset, hardware loads the calibration byte into the FOSCCAL Register and thereby automatically calibrates the Fast RC Oscillator. At 25 °C, this calibration gives a frequency of 4 MHz ± 3%. The oscillator can be calibrated to any frequency in the range 3.7 - 4.0 MHz within ±1% accuracy, by changing the FOSCCAL register. For more information on the pre-programmed calibration value, see the section ”Calibration Bytes” on page 198. The start-up times for the Fast RC Oscillator are determined by the SUT Fuses as shown in Table 7-1 on page 26. Note: 1. The device is shipped with this option selected. Table 7-1. Start-up times for the internal calibrated RC Oscillator clock selection SUT1:0 Start-up Time from Power-down and Power-save Additional Delay from Reset 00 6 CK 14CK 01 6 CK 14CK + 4.1 ms 10 6 CK 14CK + 65 ms(1) 11 Reserved |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |