AAT3153 datasheet(8/14 Pages) AAT

8 / 14 page

AAT3153

High Efficiency 1X/1.5X/2X Charge Pump

For White LED Applications

3153.2005.12.0.93

Functional Block Diagram

1X, 1.5X, and 2X

Charge Pump

D/A

6 x 16 bit

ROM

6 x 16 bit

ROM

S2Cwire

Interface

Soft-Start

Control

1MHz

Oscillator

Voltage

Reference

VIN

EN/SET

VOUT

C1+

C1- C2+

C2-

Functional Description

The AAT3153 is a tri-mode load switch (1X) and

high efficiency (1.5X or 2X) charge pump device

intended for white LED backlight applications. To

maximize power conversion efficiency, an internal

sensing circuit monitors the voltage required on

each constant current sink input and sets the load

switch and charge pump modes based on the input

battery voltage and the current sink input voltage.

As the battery discharges over time, the AAT3153

charge pump is enabled when any of the four cur-

rent sink inputs near dropout. The charge pump ini-

tially starts in 1.5X mode. If the charge pump out-

put drops enough for any current source output to

become close to dropout, the charge pump will

automatically transition to 2X mode. The AAT3153

requires only four external components: two 1µF

ceramic capacitors for the charge pump flying

capacitors (C

1 and C2), one 1µF ceramic input

capacitor (C

IN), and one 0.33µF to 1µF ceramic

charge pump output capacitor (C

OUT).

AAT3153 데이터시트(PDF) 8 Page - Advanced Analog Technology, Inc.

AAT3153 데이터시트(HTML) 8 Page - Advanced Analog Technology, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14

데이터시트 다운로드

링크 URL