EMC6D103S datasheet(13/84 Pages) SMSC

13 / 84 page

Fan Control Device with High Frequency PWM Support and Hardware Monitoring Features

Datasheet

SMSC EMC6D103S

Revision 0.2 (06-14-06)

DATASHEET

Chapter 4 Operational Description

4.1

Maximum Guaranteed Ratings

Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to +70oC

Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55o to +150oC

Lead Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Refer to JEDEC Spec. J-STD-020

Maximum VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0V

Positive Voltage on any pin (except for analog inputs), with respect to Ground . . . . . . . . . . . . . . 5.5V

Negative Voltage on any pin (except for analog inputs), with respect to Ground. . . . . . . . . . . . . . -0.3V

Positive Voltage on voltage analog inputs:

Vccp_in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V

2.5V_in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0V

+5V_in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0V

12V_in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17V

Note: Stresses above those listed could cause permanent damage to the device. This is a stress

rating only and functional operation of the device at any other condition above those indicated

in the operation sections of this specification is not implied. When powering this device from

laboratory or system power supplies, it is important that the Absolute Maximum Ratings not be

exceeded or device failure can result. Some power supplies exhibit voltage spikes on their

outputs when the AC power is switched on or off. In addition, voltage transients on the AC

power line may appear on the DC output. If this possibility exists, it is suggested that a clamp

circuit be used.

4.2

Ratings for Operation

TA = 0oC - 70oC, VCC=+3.3V

±10%

PARAMETER

SYMBOL

MIN

TYP

MAX

UNITS

COMMENTS

Temperature-to-Digital

Converter Characteristics

Internal Temperature

Accuracy

External Diode Sensor

Accuracy

-3

-2

-5

-3

±0.25

0oC <= TA <= 70oC

40oC <= TA <= 70oC

-40oC <= TS <= 125oC

40oC <= TS <= 100oC

EMC6D103S 데이터시트(PDF) 13 Page - SMSC Corporation

EMC6D103S 데이터시트(HTML) 13 Page - SMSC Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

데이터시트 다운로드

링크 URL