AM29LV065DU101REF datasheet(17/54 Pages) AMD

17 / 54 page

February 16, 2006

Am29LV065D

Autoselect Mode

The autoselect mode provides manufacturer and de-

vice identification, and sector protection verification,

through identifier codes output on DQ7–DQ0. This

mode is primarily intended for programming equip-

ment to automatically match a device to be pro-

grammed with its corresponding programming

algorithm. However, the autoselect codes can also be

accessed in-system through the command register.

When using programming equipment, the autoselect

mode requires V

ID (8.5 V to 12.5 V) on address pin A9.

Address pins A6, A1, and A0 must be as shown in

Table 3. In addition, when verifying sector protection,

the sector address must appear on the appropriate

highest order address bits (see Table 2). Table 3

shows the remaining address bits that are don’t care.

When all necessary bits have been set as required,

the programming equipment may then read the corre-

sponding identifier code on DQ7–DQ0.

To access the autoselect codes in-system, the host

system can issue the autoselect command via the

command register, as shown in Table 10. This method

does not require V

ID. Refer to the Autoselect Com-

mand Sequence section for more information.

Table 3.

Am29LV065D Autoselect Codes, (High Voltage Method)

Legend: L = Logic Low = V

IL, H = Logic High = VIH, SA = Sector Address, X = Don’t care.

Description

CE#

OE#

WE#

A22

A16

A15

A10

DQ7 to DQ0

Manufacturer ID: AMD

01h

Device ID: Am29LV065D

93h

Sector Protection

Verification

80h (protected),

00h (unprotected)

SecSi Sector Indicator Bit

(DQ7)

90h (factory locked),

10h (not factory locked)

AM29LV065DU101REF 데이터시트(PDF) 17 Page - Advanced Micro Devices

AM29LV065DU101REF 데이터시트(HTML) 17 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

데이터시트 다운로드

링크 URL