Flexdip CYA112

Endress+Hauser

3

The assembly can be fitted and mounted depending on the ambient conditions. Please note the

following:

• Standard version

The immersion tube has an outer diameter of 40 mm (1.6 in). It is used for fixed installation or

with a pendulum holder. (The pendulum holder is part of the CYH112 holder system)

• With chain retainer

The immersion tube is suspended from a chain at the top by hooking it into a multifunctional

clamp ring and a stainless steel bracket. (The chain is part of the CYH112 holder system)

• With float

The immersion tube (PVC) is fitted with a float. Combined with a pendulum holder, the float is

used for varying water levels. (The pendulum holder is part of the CYH112 holder system)

The CYH112 holder system is particularly suitable for use with the assembly, and has been

specially designed for this assembly.

Stainless steel version

Available lengths

From 600 mm (23.6 in), are delivered in pieces measuring 600 mm (23.6 in) and

1200 mm (47.2 in)

Maximum length

3600 mm (141.7)

Thread

M36 male thread

G1" female thread

Type of installation Primarily for fixed installation, the assembly can also be used with a chain retainer up to

1200 mm (47.2 in)

The threaded joints are sealed with an O-ring.

Connecting pipes have a G1" thread for the sensors. Various sensor adapters are available (NPT ¾", G

¾", Pg 13.5) for sensors with other threads.

Sensor adapter →  16

G 1"

M36

A0010876

 2

Connecting pipe 0°, 45° and 90° (from left to right)

A connecting pipe is screwed onto the end of the immersion tube. An O-ring seals the pipes against

the medium.