Managed Industrial PoE++ Switch

Features

• Industrial Strength (-40C to +85C Operating Temperature)

• 10/100/1000 Gigabit Compatible Ethernet and 2.5G Fiber

• Two Configurations Available:

• 4 PoE++ (802.3bt 90W) and 2 fiber (SFP) Ports

• 2 PoE++(802.3bt 90W) and 6 PoE+(802.3at) and 2 fiber (SFP)

Ports

• Manageable via Console Port or IP

• Surge Protected Voltage and Ethernet Inputs, Metal Shell

• Integrated DIN Rail Mount and Wall Mounts

Applications

• Outdoor Network Installations

• Cameras and Wireless Radios

• Factory networks

• PoE Lighting Applications

Description

The TP-SWxGBT-2SFP Power over Ethernet (PoE) 6 and 10 port Gigabit switches offered by Tycon® are fully

automatic high speed Layer 2+ Ethernet manageable switches. The 6 port model has 4 GigE PoE++(90W) and 2 SFP

2.5G ports and the 10 port model has 2 GigE PoE++(90W) and 6 GigE PoE+(30W) and 2 SFP 2.5G ports. The PoE

ports are manageable via the user interface. The maximum total power for all ports is an impressive 360W. They utilize

industry standard 802.3at/bt detection for fully automatic operation.

The switch features security protocols like SSH and SSL for secure access of the switch

command interface. The interface can be accessed via the serial console

port or any of the Ethernet ports. The command interface can be controlled

via web browser, command line interface(CLI), TELNET, SSH or SNMP.

With L2+ features, the switches provide better manageability, security, QOS

features and performance. VLAN, Port Mirroring, Port Isolation, IGMP

Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP

Source Guard, Access Control Lists, PoE++ management are just some of

the features available with this Industrial PoE Switch.

Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also

supported.

The switches are compatible with Green Ethernet standards. The switch

can automatically power down the port Ethernet drivers when a link is not

active. Active mode is resumed without loss of any packets when the switch

detects the link is active. The switches also automatically adjust the signal

strength depending on cable length to save power.

DATA SHEET

TP-SWxGBT-2SFP

TP-SW8GBT-2SFP 8+2 PoE Switch