Dimensions are shown in mm (inch)

Dimensions subject to change

111

Assy Insts

BODY ASSEMBLY

CAP

RF Coaxial Connectors

Assembly Instructions

AI-98

SMA Right Angle Connectors, Direct Solder Type for Semi-Rigid Cable

1. Trim cable jacket, dielectric and center conductor to dimensions shown, being careful not to fracture

the center conductor. Tin center conductor (DO NOT OVER TIN).

2. Slide cable into body and solder into place.

3. Solder center conductor to contact (do not over solder), then locate the cap in rear of body and dimple

or lightly punch to ensure it is locked in position.

AB

4,75

± 0,13 (.187 ± .005)

2,29

± 0,13 (.097 ± .005)