TECHNICAL DATA

DATA SHEET D0076 REV. -

 China - Germany - Korea - Singapore - United States 

 http://www.smc-diodes.com - sales@ smc-diodes.com 

1C5820

1C5821

1C5822

Mechanical Dimensions: In Inches (mm)

Bottom side metalization Ag-30kA minimum

Top side metalization Al - 25 kA minimum or

Ag - 30 kA minimum.

Bottom side is cathode, top side is anode

Dimension H = 0.0105  0.001 (0.27  0.025) for Al top;

Dimension H = 0.0155  0.001 (0.39  0.025) for Ag top.

Gold Option Available for Top and/or Bottom Metalization

See Part Ordering Information below

H

Default part number is Al top, Ag bottom.

Add the following suffix for these metal combinations:

Suffix

Top

Bottom

Part Number

Al

Ag

1C5822

AG

Al

Au

1C5822AG

BB

Ag

Ag

1C5822BB

BG

Ag

Au

1C5822BG

GG

Au

Au

1C5822GG

GB

Au

Ag

1C5822GB

A = Ti (0.3 kA) / Al (25 kA)

B = Ti (1.2 kA) / Ni (1.8 kA) / Ag (30kA)

G = Ti (1.2 kA) / Ni (1.8 kA) / Au (12kA) (

TOP) / Ti (1.2 kA) / Ni (1.8 kA) / Au (4kA) (BOTTOM)

A

B

0.059  0.002(1.50  0.05)

0.052  0.002(1.32  0.05)

DISCLAIMER:

1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product

characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales

department for the latest version of the datasheet(s).

2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,

medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by

means of users’ fail-safe precautions or other arrangement .

3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or

any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd

assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,

products or circuits described in the datasheets.

4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any

secondary damage resulting from use at a value exceeding the absolute maximum rating.

5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics

(Nanjing) Co., Ltd.

6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of

SMC - Sangdest Microelectronics (Nanjing) Co., Ltd.

7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will

hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third

party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and

regulations..

B

A