SC101161DT datasheet(73/142 Pages) FREESCALE

73 / 142 page

Device User Guide — 9S12DT128DGV2/D V02.15

Freescale Semiconductor

NOTE:

All VSS pins must be connected together in the application.

2.4.1 VDDX,VSSX — Power & Ground Pins for I/O Drivers

External power and ground for I/O drivers. Because fast signal transitions place high, short-duration

current demands on the power supply, use bypass capacitors with high-frequency characteristics and place

them as close to the MCU as possible. Bypass requirements depend on how heavily the MCU pins are

loaded.

2.4.2 VDDR, VSSR — Power & Ground Pins for I/O Drivers & for Internal

Voltage Regulator

External power and ground for I/O drivers and input to the internal voltage regulator. Because fast signal

transitions place high, short-duration current demands on the power supply, use bypass capacitors with

high-frequency characteristics and place them as close to the MCU as possible. Bypass requirements

depend on how heavily the MCU pins are loaded.

2.4.3 VDD1, VDD2, VSS1, VSS2 — Internal Logic Power Supply Pins

Power is supplied to the MCU through VDD and VSS. Because fast signal transitions place high,

short-duration current demands on the power supply, use bypass capacitors with high-frequency

characteristics and place them as close to the MCU as possible. This 2.5V supply is derived from the

internal voltage regulator. There is no static load on those pins allowed. The internal voltage regulator is

turned off, if VREGEN is tied to ground.

NOTE:

No load allowed except for bypass capacitors.

VDDR

5.0V

External power and ground, supply to pin drivers and internal

voltage regulator.

VSSR

VDDX

107

5.0V

External power and ground, supply to pin drivers.

VSSX

106

VDDA

5.0V

Operating voltage and ground for the analog-to-digital

converters and the reference for the internal voltage regulator,

allows the supply voltage to the A/D to be bypassed

independently.

VSSA

VRL

Reference voltages for the analog-to-digital converter.

VRH

5.0V

VDDPLL

2.5V

Provides operating voltage and ground for the Phased-Locked

Loop. This allows the supply voltage to the PLL to be

bypassed independently. Internal power and ground

generated by internal regulator.

VSSPLL

VREGEN

Internal Voltage Regulator enable/disable

Mnemonic

Pin Number

Nominal

Voltage

Description

112-pin QFP

SC101161DT 데이터시트(PDF) 73 Page - Freescale Semiconductor, Inc

SC101161DT 데이터시트(HTML) 73 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL