MA0S506AJ-R7 datasheet(2/3 Pages) MACOM

2 / 3 page

SPDT T/R Switch

5.0 - 6.0 GHz

MA0S506AJ

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

Parameter

Test Conditions

Unit

Min.

Typ.

Max.

Insertion Loss

—

1.4

1.8

Isolation

—

Return Loss

—

TRISE, TFALL

TON, TOFF

10% to 90% RF, 90% to 10% RF

50% Control to 90% RF, 50% Control to 10% RF

—

1 dB Compression

V1/V2 = 0/3 V, VDD = 3 V

V1/V2 = 0/5 V, VDD = 5 V

dBm

—

Third Order Intercept

dBm

—

Insertion Loss Path

Isolated Path

RF1/RFC

RF2/RFC

RF1/RFC

Switch Logic Table 5,6

5. “0” = 0 +/- 0.2 volts

6. “1” = +2.7 to +5 volts, equal to VDD

Electrical Specifications: TA = 25°C, Z0 = 50 Ω

4. Unless otherwise specified, input power is -10 dBm, VDD is +5 V, control voltages are 0/+5 V, and test frequency is 5.775 GHz

Application Schematic

Board material: Rogers Duroid RO4350, 20 mil thick

dielectric (er=3.48). All RF traces are 50 ohms (43mils

wide).

MA0S506AJ-R7 데이터시트(PDF) 2 Page - Tyco Electronics

MA0S506AJ-R7 데이터시트(HTML) 2 Page - Tyco Electronics

Html Pages

1 2 3

데이터시트 다운로드

링크 URL