| 전자부품 데이터시트 검색엔진 |
|
34921 데이터시트(PDF) 27 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
34921 데이터시트(HTML) 27 Page - Freescale Semiconductor, Inc |
|
27 / 36 page ![]() Analog Integrated Circuit Device Data Freescale Semiconductor 27 34921 FUNCTIONAL DESCRIPTION FUNCTIONAL INTERNAL BLOCK DESCRIPTION A/D Converter Input Structure The input impedance of a selected channel is an RC circuit. As shown in Figure 14, the input impedance of the selected channel is a resistor connected to the sample and hold (S/H) capacitor. The sample and hold time is 15 * tSCLK, or a minimum of 0.9285 µs. The tolerances of the internal S/ H components are such that a time constant is about 93.6 ns. Therefore to achieve a proper level on the S/H capacitor (5*93.6 ns) = 0.468 µs, minimum, is required to satisfy internal component time constants. This only allows 460 ns for external time constants. Therefore, the maximum source impedance of the circuit driving the selected A/D channel is 7.8 k Ω when the SCLK speed matches the speed configuration bit. Figure 14. A/D Converter Input Structure ADC Output Addressing The return word to the digital subsystem also contains two conversion done bits, A/Ddone1 and A/Ddone2 (refer to Table 8). The A/Ddone1 bit is used for single conversions and the first conversion when input pairs are selected. The A/Ddone2 bit is used for the second conversion when input pairs are selected. A zero to one transition of these bits on successive return words indicates that a conversion cycle is complete and the data sent in that return word is valid for that conversion. The conversion done bits will only be asserted for one serial frame, although the data may be valid for multiple frames. The A/Dr bits indicate which A/D input is being reported when data is valid (refer to Table 9). Idle A2Ddone1=0 A/Da=Last Address A/Dd=Last Conversion Start A2Ddone2=0 Conversion Convert A2Ddone1=0 A/Da=Current A/Dd=Last A2Ddone2=0 Conversion Start Start Start Done A/Da=1 Start Start Conversion Done Address Send Data A2Ddone1=0 A2Da=Current A2Dd=Current A2Ddone2=0 Conversion Address Convert2 A2Ddone1=0 A/Da=Current A/Dd=Last A2Ddone2=0 Conversion Address Send Data2 A2Ddone1=0 A/Da=Current A/Dd=Current A2Ddone2=1 Conversion Address Note “Start” is bit 1 of the serial input normal frame. Table 8. A/D Done Bits A/Ddone1 A/Ddone2 Return Data and A/Dr Value Rising 0 Valid for single or first conversion 0 Rising Valid for second conversion 0 0 Don’t care Table 9. A/D Channel of Current A/D Data NORMAL Output Frame Bit 4 NORMAL Output Frame Bit 5 NORMAL Output Frame Bit 6 A/D Value Reported A/Dr0 A/Dr1 A/Dr2 0 0 1 A 1 0 1 B 0 1 1 A 1 1 1 B 0 0 0 AN0/ANALOGOUT_A 1 0 0 AN1/ANALOGOUT_B 0 1 0 AN2/ANALOGIN_A (direct input) 1 1 0 AN3/ANALOGIN_B (direct input) I/V I/V Channel Select Logic S/H C < 11.7 pF hold SCLK AN0/ANALOGOUT_A AN1/ANALOGOUT_B AN2/ANALOGIN_A AN3/ANALOGIN_B A A B B Multiplexer RDS(on) < 8.0 kΩ |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |