| 전자부품 데이터시트 검색엔진 |
|
U74CB3Q3305L-P08-R 데이터시트(PDF) 5 Page - Unisonic Technologies |
|
|
|||||||||||||||||||||||||||||
U74CB3Q3305L-P08-R 데이터시트(HTML) 5 Page - Unisonic Technologies |
|
5 / 7 page ![]() U74CB3Q3305 Preliminary CMOS IC UNISONICTECHNOLOGIESCO.,LTD 5 of 7 www.unisonic.com.tw QW-R502-D261.a ELECTRICAL CHARACTERISTICS (Cont.) Over recommended operating free-air temperature range (Unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT ON Output Capacitance CIO(ON) VCC=3.3V, Switch ON, VIN=VCC or GND, VI/O=5.5V, 3.3V, 0 8.0 10.5 pF Static Drain-Source On-State Resistance (Note 6) RDS(ON) VCC=3.3V, TYP at VCC=2.5V VIN=0, IO=30mA 3.5 8.0 Ω VIN=1.7V, IO=-15mA 4 9.0 Ω VCC=3.0V VIN=0, IO=30mA 3.5 6.0 Ω VIN=2.4V, IO=-15mA 4 8.0 Ω Notes: 1. VIN and IIN refer to control inputs. VI, VO, II, and IO refer to data pins. 2. All typical values are at VCC=3.3V (unless otherwise noted), TA=25°C. 3. For I/O ports, the parameter IOZ includes the input leakage current. 4. This is the increase in supply current for each input that is at the specified TTL voltage level, rather than VCC or GND. 5. This parameter specifies the dynamic power-supply current associated with the operating frequency of a single control input. 6. Measured by the voltage drop between the A and B terminals at the indicated current through the switch. ON-state resistance is determined by the lower of the voltages of the two (A or B) terminals. DYNAMIC CHARACTERISTICS PARAMETER SYMBOL TEST CONDITIONS TA=25°C TA=-40°C~+125°C UNIT MIN TYP MAX MIN TYP MAX From Input (OE) to Output (A or B) (Note 1) fOE VCC=2.5V±0.2V 10 10 MHz VCC=3.3V±0.3V 20 20 MHz Propagation Delay Time, From Input (A or B) to Output (B or A) (Note 2) tPD (tPLH/tPHL) CL=30pF VCC=2.5V±0.2V 0.2 0.6 ns CL=50pF VCC=3.3V±0.3V 0.2 0.6 ns Enable Delay Time, From Input (OE) to Output (A or B) ten (tPZL/tPZH) VCC=2.5V±0.2V 1 12 1 13 ns VCC=3.3V±0.3V 1 6.5 1 7.5 ns Disable Delay Time, From Input (OE) to Output (A or B) tdis (tPLZ/tPHZ) VCC=2.5V±0.2V 1 6 1 7.5 ns VCC=3.3V±0.3V 1 5.5 1 7 ns Notes: 1. Maximum switching frequency for control input (VO > VCC, VI = 5V, RL ≧ 1MΩ, CL = 0). 2. The propagation delay is the calculated RC time constant of the typical ON-state resistance of the switch and the specified load capacitance, when driven by an ideal voltage source (zero output impedance). OPERATING CHARACTERISTIC PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Power Dissipation Capacitance CPD No load 32 pF |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |