EPR-16 datasheet(21/36 Pages) POWERINT

부품명	EPR-16

상세설명	Engineering Prototype Report for EP-16 2.75 W Charger/Adapter Using LNK501

PDF	36 Pages

Scroll/Zoom	100%

제조업체	POWERINT [Power Integrations, Inc.]

홈페이지	http://www.powerint.com

Logo

21 / 36 page

17-May-04

EPR-16 – LinkSwitch 2.75 W Charger/Adapter

9.4 Output Ripple Measurements

9.4.1 Ripple Measurement Technique

For DC output ripple measurements, a modified oscilloscope test probe must be utilized

in order to reduce spurious signals due to pickup. Details of the probe modification are

provided in Figure 17 and Figure 18.

The 5125BA probe adapter is affixed with two capacitors tied in parallel across the probe

tip. The capacitors include one (1) 0.1

µF/50 V ceramic type and one (1) 1.0 µF/50 V

aluminum electrolytic.

Probe Ground

Probe Tip

Figure 17 – Oscilloscope Probe Prepared for Ripple Measurement.

(End cap and ground lead removed).

Figure 18 – Oscilloscope Probe with Probe Master 5125BA BNC Adapter.

(Modified with wires for probe ground for ripple measurement and two

parallel decoupling capacitors added).

Page 21 of 36

Power Integrations

Tel: +1 408 414 9660 Fax: +1 408 414 9760

EPR-16 데이터시트(PDF) 21 Page - Power Integrations, Inc.