| 전자부품 데이터시트 검색엔진 |
|
MCP6021 데이터시트(PDF) 12 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP6021 데이터시트(HTML) 12 Page - Microchip Technology |
|
12 / 34 page ![]() MCP6021/1R/2/3/4 DS21685C-page 12 © 2006 Microchip Technology Inc. 3.0 PIN DESCRIPTIONS Descriptions of the pins are listed in Table 3-1. TABLE 3-1: PIN FUNCTION TABLE 3.1 Analog Outputs The op amp output pins are low-impedance voltage sources. 3.2 Analog Inputs The op amp non-inverting and inverting inputs are high- impedance CMOS inputs with low bias currents. 3.3 VREF Output (MCP6021 and MCP6023) Mid-supply reference voltage provided by the single op amps (except in SOT-23-5 package). This is an unbuffered, resistor voltage divider internal to the part. 3.4 CS Digital Input This is a CMOS, Schmitt-triggered input that places the part into a low power mode of operation. 3.5 Power Supply (VSS and VDD) The positive power supply pin (VDD) is 2.5V to 5.5V higher than the negative power supply pin (VSS). For normal operation, the other pins are at voltages between VSS and VDD. Typically, these parts are used in a single (positive) supply configuration. In this case, VSS is connected to ground and VDD is connected to the supply. VDD will need a local bypass capacitor (typically 0.01 µF to 0.1 µF) within 2 mm of the VDD pin. These parts need to use a bulk capacitor (typically 1 µF or larger) within 100 mm of the VDD pin; it can be shared with nearby analog parts. MCP6021 (PDIP, SOIC, MSOP, TSSOP) (Note 1) MCP6021 (SOT-23-5) (Note 1) MCP6021R (SOT-23-5) (Note 2) MCP6022 MCP6023 MCP6024 Symbol Description 61 1 1 6 1 VOUT,VOUTA Analog Output (op amp A) 24 4 2 2 2 VIN–, VINA– Inverting Input (op amp A) 33 3 3 3 3 VIN+, VINA+ Non-inverting Input (op amp A) 75 2 8 7 4 VDD Positive Power Supply —— — 5 — 5 VINB+ Non-inverting Input (op amp B) —— — 6 — 6 VINB– Inverting Input (op amp B) —— — 7 — 7 VOUTB Analog Output (op amp B) —— — — — 8 VOUTC Analog Output (op amp C) —— — — — 9 VINC– Inverting Input (op amp C) —— — — — 10 VINC+ Non-inverting Input (op amp C) 42 5 4 4 11 VSS Negative Power Supply —— — — — 12 VIND+ Non-inverting Input (op amp D) —— — — — 13 VIND– Inverting Input (op amp D) —— — — — 14 VOUTD Analog Output (op amp D) 5— — — 5 — VREF Reference Voltage —— — — 8 — CS Chip Select 1, 8 — — — 1 — NC No Internal Connection Note 1: The MCP6021 in the 8-pin MSOP package is only available for E-temp (Extended Temperature) parts. The MCP6021 in the 8-pin TSSOP package is only available for I-temp (Industrial Temperature) parts. 2: The MCP6021R is only available in the 5-pin SOT-23 package, and for E-temp (Extended Temperature) parts. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |