 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
MCP6546-E/MS 데이터시트(PDF) 3 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP6546-E/MS 데이터시트(HTML) 3 Page - Microchip Technology |
|
|
3 / 32 page  © 2006 Microchip Technology Inc. DS21714E-page 3 MCP6546/6R/6U/7/8/9 AC CHARACTERISTICS Open-Drain Output Output Pull-Up Voltage VPU 1.6 — 10 V (Note 4) High-Level Output Current IOH -100 — — nA VDD = 1.6V to 5.5V, VPU = 10V (Note 4) Low-Level Output Voltage VOL VSS —VSS + 0.2 V IOUT = 2 mA, VPU = VDD = 5V Short-Circuit Current ISC —±1.5 — mA VPU = VDD = 1.6V (Note 4) ISC –30 — mA VPU = VDD = 5.5V (Note 4) Output Pin Capacitance COUT —8 — pF Electrical Specifications: Unless otherwise indicated, VDD = +1.6V to +5.5V, VSS = GND, TA = 25°C, VIN+ = VDD/2, Step = 200 mV, Overdrive = 100 mV, RPU =2.74 kΩ to VPU = VDD, and CL = 36 pF (Refer to Figure 1-2 and Figure 1-3). Parameters Sym Min Typ Max Units Conditions Fall Time tF —0.7 — µs (Note 1) Propagation Delay (High-to-Low) tPHL —4.0 8.0 µs Propagation Delay (Low-to-High) tPLH —3.0 8.0 µs (Note 1) Propagation Delay Skew tPDS —-1.0 — µs (Notes 1 and 2) Maximum Toggle Frequency fMAX — 225 — kHz VDD = 1.6V fMAX — 165 — kHz VDD = 5.5V Input Noise Voltage Eni — 200 — µVP-P 10 Hz to 100 kHz Note 1: tR and tPLH depend on the load (RL and CL); these specifications are valid for the indicated load only. 2: Propagation Delay Skew is defined as: tPDS = tPLH - tPHL. DC CHARACTERISTICS (CONTINUED) Electrical Specifications: Unless otherwise indicated, VDD = +1.6V to +5.5V, VSS = GND, TA = 25°C, VIN+ = VDD/2, VIN– = VSS, RPU =2.74kΩ to VPU = VDD (Refer to Figure 1-3). Parameters Sym Min Typ Max Units Conditions Note 1: The input offset voltage is the center of the input-referred trip points. The input hysteresis is the difference between the input-referred trip points. 2: VHYST at differential temperatures is estimated using: VHYST (TA) = VHYST + (TA -25°C) TC1 + (TA - 25°C)2TC2. 3: Input bias current at temperature is not tested for the SC-70-5 package 4: Do not short the output above VSS + 10V. Limit the output current to Absolute Maximum Rating of 30 mA. The minimum VPU test limit was VDD before Dec. 2004 (week code 52). MCP6548 CHIP SELECT (CS) CHARACTERISTICS Electrical Specifications: Unless otherwise indicated, VDD = +1.6V to +5.5V, VSS = GND, TA = 25°C, VIN+ = VDD/2, VIN– = VSS, RPU =2.74kΩ to VPU = VDD, and CL = 36 pF (Refer to Figures 1-1 and 1-3). Parameters Sym Min Typ Max Units Conditions CS Low Specifications CS Logic Threshold, Low VIL VSS — 0.2 VDD V CS Input Current, Low ICSL —5 — pA CS = VSS CS High Specifications CS Logic Threshold, High VIH 0.8 VDD —VDD V CS Input Current, High ICSH —1 — pA CS = VDD CS Input High, VDD Current IDD —18 — pA CS = VDD CS Input High, GND Current ISS —-20 — pA CS = VDD Comparator Output Leakage IO(LEAK) —1 — pA VOUT = VSS+10V, CS = VDD CS Dynamic Specifications CS Low to Comparator Output Low Turn-on Time tON —2 50 ms CS = 0.2VDD to VOUT = VDD/2, VIN– = VDD CS High to Comparator Output High Z Turn-off Time tOFF —10 — µs CS = 0.8VDD to VOUT = VDD/2, VIN– = VDD CS Hysteresis VCS_HYST —0.6 — V VDD = 5V |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
