MCP1402 datasheet(9/20 Pages) MICROCHIP

9 / 20 page

DS22052A-page 9

MCP1401/02

3.0

PIN DESCRIPTIONS

The descriptions of the pins are listed in Table 3-1.

TABLE 3-1:

PIN FUNCTION TABLE (1)

3.1

Supply Input (VDD)

VDD is the bias supply input for the MOSFET driver and

has a voltage range of 4.5V to 18V. This input must be

decoupled to ground with a local capacitor. This bypass

capacitor provides a localized low-impedance path for

the peak currents that are to be provided to the load.

3.2

Control Input (IN)

The MOSFET driver input is a high-impedance, TTL/

CMOS-compatible input. The input also has hysteresis

between the high and low input levels, allowing them to

be driven from slow rising and falling signals, and to

provide noise immunity.

3.3

Ground (GND)

Ground is the device return pin. The ground pin should

have a low impedance connection to the bias supply

source return. High peak currents will flow out the

ground pin when the capacitive load is being

discharged.

3.4

Output (OUT)

The output is a CMOS push-pull output that is capable

of sourcing

and sinking

0.5A of peak current

(VDD = 18V). The low output impedance ensures the

gate of the external MOSFET will stay in the intended

state even during large transients. This output also has

a reverse current latch-up rating of 0.5A.

SOT-23-5

Symbol

Description

GND

Ground

2VDD

Supply Input

Control Input

GND

Ground

OUT

Output

Note 1: Duplicate pins must be connected for proper operation.

MCP1402 데이터시트(PDF) 9 Page - Microchip Technology

MCP1402 데이터시트(HTML) 9 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

데이터시트 다운로드

링크 URL