REV.

C

AD8012

–5–

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although the

AD8012 features proprietary ESD protection circuitry, permanent damage may occur on devices

subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended

to avoid performance degradation or loss of functionality.

ABSOLUTE MAXIMUM RATINGS

1

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.6 V

Internal Power Dissipation

2

SOIC Package (R) . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8 W

MSOP Package (RM) . . . . . . . . . . . . . . . . . . . . . . . . 0.6 W

Input Voltage (Common Mode) . . . . . . . . . . . . . . . . . . . .

±V

S

Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . .

±2.5 V

Output Short-Circuit Duration

. . . . . . . . . . . . . . . . . .Observe Power Derating Curves

Storage Temperature Range RM, R . . . . . . –65

°C to +125°C

Operating Temperature Range (A Grade) . . . –40

°C to +85°C

Lead Temperature Range (Soldering 10 sec) . . . . . . . . . 300

°C

NOTES

1Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

2Specification is for device in free air at +25

°C.

8-Lead SOIC Package: JA = 155

°C/W

8-Lead MSOP Package: JA = 200

°C/W