Rev: 13 September 2005
Class 2 Bluetooth
™ Module - F2M03C2
Datasheet
Features
•
Available with complete Bluetooth software stack
•
Wireless UART functionality without extra protocol.
•
Headset functionality available.
•
Serial interface, 8 digital and 2 analog I/O
•
PCM interface for up to 3 simultaneous voice channels
•
Nominal 20m range
•
Transmit power up to +4dBm (Bluetooth Class2)
•
4 low power modes
•
Piconet and Scatternet capability, support for up to seven slaves
•
Physical size: 25x14 mm
•
Surface mountable
• Bluetooth v1.1 compliant
Applications
Prototyping and volume production of:
•
Industrial and Domestic Appliances
•
Stand alone sensors
•
Embedded systems
•
Cordless Headsets
•
Computer peripherals (Mice, Keyboards,
USB dongles etc)
•
Handheld, Laptop and Desktop computers
•
Mobile Phones
General Description
This module is a Class 2 surface mountable
Bluetooth system (in an automatic mounting line
or manually for prototyping). It provides a fully
compliant
device
for
data
and
voice
communications. The interfaces to a host (UART
and USB) supports full Bluetooth data rate of
723.2kbps.
A
13-bit
PCM,
8ksamples/s,
synchronous bidirectional audio interface is
available. Digital and analog I/O and I
2C
interface are supported by the module.
The module is available with a number of
different firmware versions: The Wireless UART
firmware is an embedded single processor
solution that implements the Serial Port Profile
(SPP). All data flows transparent through the
serial port to the remote device. Using high level
commands the user can configure the Bluetooth
connection.
© 2004 Free2move AB
BLUETOOTH is a trademark owned by
Bluetooth SIG, Inc., U.S.A. and licensed to Free2move
Other firmware versions are: Headset, HCI,
RFCOMM and the possibility to get customized
standalone applications implemented as an on
chip solution.
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
