| 전자부품 데이터시트 검색엔진 |
|
LPC55S2X 데이터시트(PDF) 65 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC55S2X 데이터시트(HTML) 65 Page - NXP Semiconductors |
|
65 / 132 page ![]() NXP Semiconductors LPC55S2x/LPC552x 32-bit Arm Cortex®-M33 microcontroller 7.25.7.1 Features • Ultra simple timer. • Write once to start. • Interrupt or software polling. • Four capture registers that can be triggered by external pin transitions. 7.26 Digital peripherals 7.26.1 DMA controller The DMA controller allows peripheral-to memory, memory-to-peripheral, and memory-to-memory transactions. Each DMA stream provides unidirectional DMA transfers for a single source and destination. Two identical DMA controllers are provided on the LPC55S2x/LPC552x. 7.26.1.1 Features • DMA0: 22 channels, 21 of which are connected to peripheral DMA requests. These come from the Flexcomm (USART, SPI, I2C, and I2S), high-speed SPI interface, ADC, AES, and SHA interfaces. 22 trigger sources are available. • DMA1: 10 channels, 9 of which are connected to peripheral DMA requests. These come from the Flexcomm Interfaces (0, 1, and 3), high-speed SPI interface, AES, and SHA interfaces. 15 trigger sources are available. • DMA operations can be triggered by on-chip or off-chip events. • Priority is user selectable for each channel (up to eight priority levels). • Continuous priority arbitration. • Address cache with four entries. • Efficient use of data bus. • Supports single transfers up to 1,024 words. • Address increment options allow packing and/or unpacking data. 7.26.2 Programmable Logic Unit (PLU) The PLU is comprised of 26 5-input LUT elements. Each LUT element contains a 32-bit truth table (look- up table) register and a 32:1 multiplexer. During operation, the five LUT inputs control the select lines of the multiplexer. This structure allows any desired logical combination of the five LUT inputs. 7.26.2.1 Features • The Programmable Logic Unit is used to create small combinatorial and/or sequential logic networks including simple state machines. • The PLU is comprised of an array of 26 inter-connectable, 5-input Look-up Table (LUT) elements, and four flip-flops. • Eight primary outputs can be selected using a multiplexer from among all of the LUT outputs and the four flip- flops. • An external clock to drive the four flip-flops must be applied to the PLU_CLKIN pin if a sequential network is implemented. • Programmable logic can be used to drive on-chip inputs/triggers through external pin-to-pin connections. • A tool suite is provided to facilitate programming of the PLU to implement the logic network described in a Verilog RTL design. LPC55S2X_LPC552X All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved. Data sheet Rev. 2.3 — 29 August 2024 Document feedback 65 / 132 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |