SF400

IP Based Fingerprint

Access Control &

Time Attendance

SF400 is an IP based fingerprint terminal with both Network and Standalone

operation modes. It is connectible with ZKBio CVAccess software for access control

and time attendance management.

With Wiegand output, SF400 is flexible to connect with ZK or any 3rd party

controllers as a slave reader. Wiegand input configures two SF400 units to utilize

Master & Slave solution to enable users verification at both entrance and exit. Anti-

passback function is also enabled to maximize the security level.

Auxiliary input interface allows SF400 to connect with an extra source, for instance, a

smoke detector or emergency switch. Once the linkage function is enabled through

the machine menu, the device generates an alarm signal and

opens doors in case of emergency.

Feature

• 2.8-inch touch screen, color display with

graphical UI for easy operation

• Up to 24 user-defined schedules that can be

activated on a daily bell alert (optional)

• Prompt audio acceptance or rejection signals

for valid or invalid fingers

• Compact and lightweight, small size for

86mm (L) x 86mm (H) socket installation

• TCP/IP communication for various networking

environments

• Supports USB flash drive for offline

data management

• Built-in auxiliary input with enhanced flexibility to

link with wired detector or emergency switch

• Up to 15 multi-verification methods to

enhance security level

• Standard access control features such as Time zone,

Holiday, A&C Group, Unlock combination etc.

• Duress Alarm offers effective protection against

duress by threats

• Tamper proof switch and multiple alarm outputs

• Multi-languages display available on request