 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
LT3045 데이터시트(PDF) 56 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
LT3045 데이터시트(HTML) 56 Page - Analog Devices |
|
|
56 / 62 page  Data Sheet LT3074 analog.com Rev 0. 56 of 62 MFR_RAIL_ADDRESS The MFR_RAIL_ADDRESS command sets a direct PMBus address for the LT3074. This address should be common to all devices attached to a single power supply rail. Only perform command writes to this address. If a read is performed from this address and the rail devices do not respond with EAXCTLY the same value, this leads to bus contention and data corruption. Setting this command to a value of 0x80 disables rail device addressing. This command has one data byte. MFR_RESET The MFR_RESET command provides a means to reset the LT3074 from the serial bus. This forces the LT3074 to turn off the output power, discharge the output and the reference, reset the digital logic, clear all faults and then perform a soft start of the output. This write-only command has no data bytes. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
