Feature

Description / Benefit

L3 Features

• Layer 3 interfaces: Routed ports, Switch Virtual Interface (SVI), Distributed Gateway

• Multiple IP-Subnet Support per Segment/SVI

• Support for up to 90K IPv4 host prefix, 14K IPv6 host prefix (i.e. Endpoints)

• Support for 1K Virtual Routing and Forwarding (VRF) entries (i.e. 1K Logical Routers)

• 1K Tenants, 1K E-VPCs

• Static Route, BGP (IPv4, IPv6), OSPF (IPv4), OSPFv3 (IPv6)

• Static and dynamic route exchange between E-VPCs

• 68K IPv4 routes, 8K IPv6 routes

• Up to 16 ways Equal-Cost Multipathing (ECMP)

• 1K Equal-Cost Multipathing (ECMP) groups

• 6K flexible ACL entries

• Policy-Based Routing

• Multicast Routing, PIM-SM

• ACL: Routed ACL with Layer 3 and 4 options to match ingress ACL

• Jumbo frame support (up to 9216 bytes)

• DHCP/DHCPv6 relay

• IP Helper

• NAT/PAT support

• BFD support for BGP

QoS

• Layer 2 IEEE 802.1p (class of service [CoS])

• Source segment or IP DSCP based Classification

• Tenant/Segment based classification

• DWRR based egress queuing

• CoS based marking

• PFC and DCBX

• IP address/subnet based QoS classification

High Availability

• Controller HA

• Headless mode (fabric forwards traffic in absence of Controller)

• Redundant Spine

• Redundant Leaf

• Redundant Links

• Controller cluster with single Virtual IP

• Support for redundant out-of-band management switch

Datasheet

arista.com

arista.com

arista.com

arista.com

8