Data Sheet

ADL5906

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. B | 7 of 30

Table 2.

Parameter

Rating

Supply Voltage, VPOS1, VPOS2

5.25 V

Input Average RF Power1

21 dBm

Equivalent Voltage, Sine Wave Input

2.51 V p-p

Internal Power Dissipation

550 mW

θJC2

10.6°C/W

θJB2

35.3°C/W

θJA2

57.2°C/W

ΨJT2

1.0°C/W

ΨJB2

34°C/W

Maximum Junction Temperature

150°C

Operating Temperature Range (ADL5906ACPZN)

−40°C to +105°C

Operating Temperature Range (ADL5906SCPZN)

−55°C to +125°C

Storage Temperature Range

−65°C to +150°C

Lead Temperature (Soldering, 60 sec)

300°C

1 This is for long durations. Excursions above this level, with durations much less

than 1 second, are possible without damage.

2 No airflow with the exposed pad soldered to a 4-layer JEDEC board.

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.