RC4136, RM4136, RV4136

QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS

SLOS072A – MARCH 1978 – REVISED JANUARY 2002

2

schematic (each amplifier)

OUT

IN+

IN–

VCC–

VCC+

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage (see Note 1): VCC+, RC4136 and RV4136

18 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

VCC+, RM4136

22 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

VCC–, RC4136 and RV4136

–18 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

VCC–, RM4136

–22 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, VID (see Note 2)

±30 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage, VI (any input) (see Notes 1 and 3)

±15 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of output short circuit to ground, one amplifier at a time (see Note 4)

Unlimited

. . . . . . . . . . . . . . . . .

Continuous total dissipation

See Dissipation Rating Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

θJA (see Note 5): D package

86

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

N package

80

°C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Case temperature for 60 seconds: FK package

260

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or N package

260

°C

. . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or W package

300

°C

. . . . . . . . . . . . . . . .

Storage temperature range, Tstg

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC–.

2. Differential voltages are at IN+ with respect to IN–.

3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.

4. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded.

5. The package thermal impedance is calculated in accordance with JESD 51-7.

DISSIPATION RATING TABLE

PACKAGE

TA ≤ 25°C

POWER RATING

DERATING

FACTOR

DERATE

ABOVE TA

TA = 70°C

POWER RATING

TA = 85°C

POWER RATING

TA = 125°C

POWER RATING

FK

800 mW

11.0 mW/

°C

77

°C

800 mW

715 mW

275 mW

J

800 mW

11.0 mW/

°C77°C

800 mW

715 mW

275 mW

W

800 mW

8.0 mW/

°C

50

°C

640 mW

520 mW

200 mW

The RM4136 and RV4136 are

obsolete and are no longer supplied.