MPC8280 datasheet(427/1386 Pages) FREESCALE

427 / 1386 page

Memory Controller

MPC8280 PowerQUICC II Family Reference Manual, Rev. 1

Freescale Semiconductor

11-7

Figure 11-4 shows a basic configuration.

Figure 11-4. Basic Memory Controller Operation

The SDRAM mode registers (LSDMR and PSDMR) define the global parameters for the 60x and local

SDRAM devices. Machine A/B/C mode registers (MxMR) define most of the global features for each

UPM. GPCM parameters are defined in the option register (ORx). Some SDRAM and UPM parameters

are also defined in ORx.

11.2.1

Address and Address Space Checking

The defined base address is written to the BRx. The bank size is written to the ORx. Each time a bus cycle

access is requested on the 60x or local bus, addresses are compared with each bank. If a match is found on

a memory controller bank, the attributes defined in the BRx and ORx for that bank are used to control the

memory access. If a match is found in more than one bank, the lowest-numbered bank handles the memory

access (that is, bank 0 has priority over bank 1).

NOTE

Although 60x bus accesses that hit a bank allocated to the local bus are

transferred to the local bus, local bus access hits to banks allocated to the

60x bus are ignored. 60x-to-local bus transactions have priority over regular

memory bank hits.

Address

Comparator

Bank Select

UPMx

GPCM

MS/BS

Fields

Signals

Timing

Generator

MUX

Internal/External Memory Access Request Select

Address (A),

Address

Type (AT)

External Signals

SDRAM Machine

MPC8280 데이터시트(PDF) 427 Page - Freescale Semiconductor, Inc