MPC8280 datasheet(692/1386 Pages) FREESCALE

692 / 1386 page

Serial Communications Controllers (SCCs)

MPC8280 PowerQUICC II Family Reference Manual, Rev. 1

20-12

Freescale Semiconductor

Figure 20-7. SCC BD and Buffer Memory Structure

In all protocols, BDs can point to buffers in the internal dual-port RAM. However, because dual-port RAM

is used for descriptors, buffers are usually put in external RAM, especially if they are large.

The CPM processes TxBDs straightforwardly; when the transmit side of an SCC is enabled, the CPM

starts with the first BD in that SCC TxBD table. Once the CPM detects that the R bit is set in the TxBD,

it starts processing the buffer. The CPM detects that the BD is ready when it polls the R bit or when the

user writes to the TODR. After data from the BD is put in the Tx FIFO, if necessary the CPM waits for the

next descriptor’s R bit to be set before proceeding. Thus, the CPM does no look-ahead descriptor

processing and does not skip BDs that are not ready. When the CPM sees a BD’s W bit (wrap) set, it returns

to the start of the BD table after this last BD of the table is processed. The CPM clears R (not ready) after

using a TxBD, which keeps it from being retransmitted before it is confirmed by the core. However, some

protocols support a continuous mode (CM), for which R is not cleared (always ready).

The CPM uses RxBDs similarly. When data arrives, the CPM performs required processing on the data

and moves resultant data to the buffer pointed to by the first BD; it continues until the buffer is full or an

event, such as an error or end-of-frame detection, occurs. The buffer is then closed; subsequent data uses

the next BD. If E = 0, the current buffer is not empty and it reports a busy error. The CPM does not move

from the current BD until E is set by the core (the buffer is empty). After using a descriptor, the CPM clears

E (not empty) and does not reuse a BD until it has been processed by the core. However, in continuous

mode (CM), E remains set. When the CPM discovers a descriptor’s W bit set (indicating it is the last BD

in the circular BD table), it returns to the beginning of the table when it is time to move to the next buffer.

Status and Control

Buffer Length

Buffer Pointer

SCCx TxBD

Table Pointer

SCCx RxBD

Table Pointer

SCCx RxBD

Table

SCCx TxBD

Table

Dual-Port RAM

Status and Control

Buffer Length

Buffer Pointer

Tx Buffer

External Memory

Rx Buffer Descriptors

Tx Buffer Descriptors

Rx Buffer

MPC8280 데이터시트(PDF) 692 Page - Freescale Semiconductor, Inc

MPC8280 데이터시트(HTML) 692 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL