 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
ME4057 데이터시트(PDF) 1 Page - Nanjing Micro One Electronics Inc |
|
|
|||||||||||||||||||||||||||||
ME4057 데이터시트(HTML) 1 Page - Nanjing Micro One Electronics Inc |
|
|
1 / 18 page  ME4057 V01 www.microne.com.cn Page 1 of 18 1A Lithium Ion Battery Linear Charger ME4057 General Description Features Typical charge cycle（1000mAh battery） Applications Typical charge cycle（1000mAh battery） ●Cellular Telephones ●Digital Still Cameras ●MP3 Players ●Bluetooth Applications ●Portable Devices ●USB Bus-Powered Chargers ME4057 is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. With a thermally enhanced 8-PIN SOP package on the bottom and low external component count make the ME4057 ideally suited for portable applications. Furthermore the ME4057 is specifically designed to work within USB power specifications. No external sense resistor is needed and no blocking diode is required due to the internal PMOSFET architecture .Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature .The charge voltage is fixed at 4.2V,and the charge current can be programmed externally with a single resistor. The ME4057 automatically terminates the charge cycle when the charge current drops to 1/10 th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed the ME4057 automatically enters a low current state dropping the battery drain current to less than 2 μA.The ME4057 can be put into shutdown mode reducing the supply current to 55 μA. Other features include Battery temperature monitor, under-voltage lockout, automatic recharge and two status pins to indicate charge and charge termination. ●Protection of battery cell reverse connection ● Programmable charge current up to 1A ●No MOSFET sense resistor or blocking diode required ●Complete linear Charger in SOP8 Package for single Cell Lithium-Ion Batteries. ●Constant-Current/Constant-Voltage operation with thermal regulation to maximize Rate Without risk of overheating. ● Preset 4.2V charge voltage with ±1% accuracy ● Automatic Recharge ● Two Status Indication for Charge status, no battery and battery failure indicators ● C/10 charge termination ● 55μA supply current in shutdown ● 2.9V trickle current charge threshold ● Soft-Start limits inrush current ● Battery Temperature Sensing ● Available in SOP8-PP package |
유사한 부품 번호 - ME4057 |
|
유사한 설명 - ME4057 |
|
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
