Frequency response

±0.5 dB at 200 Hz to 5 kHz

±2 dB at 100 Hz to 20 kHz

Level Accuracy

±2% at 1 kHz ± accuracy of 2945A, 2946A or 2948

Output Level

1 mV to 2.5 V RMS across 600

Ω

ANALOG SYSTEMS CARD (OPTION 2)

This option provides automatic testing for cellular,trunked and FM

radios and a BASIC Interpreter for customized tests.

PARALLEL INTERFACE (OPTION 4)

Allows direct connection of a parallel printer. Additionally provides 4

software programmable output lines.

Printer Port

Connector

25 way female D type

Printers Supported

75, 100, 150 dots per inch laser printers, FX 80, FX 100 Epson for-

mat.

Accessory Port

Connector

9 way female D type

Outputs

4 independently programmable output lines, each one configurable as

a logic line or as a relay contact closure. +5V supply available.

GPIB (OPTION 5)

Capability

For printing, remote instrument control or for programming of user

defined test sequences.

Complies with the following subsets defined by IEEE488:- SH1, AH1,

T6, L4, SR1, RL1, DT0, EI, DC1

MEMORY CARD DRIVE AND REAL TIME CLOCK (OPTION 6)

The memory card facility allows the storage of results, set-ups screen

dumps and user programs with SRAM cards. Meets PCMCIA 2 stan-

dard.

Allows the current date and time to be stored with results to the mem-

ory card and/or printed with a screen dump.

SSB DEMODULATOR (OPTION 8)

The SSB demodulator allows signals to be demodulated either via the

internal loudspeaker or via the accessory socket. Provides demodula-

tion of SSB signals (upper and lower sideband)

Frequency Range

400 kHz to 1 GHz

AF Demodulation Range

10 Hz to 15 kHz

Distortion

Typically less than 3% at 1 kHz (300 to 3.4 kHz)

Detection Range

2 µV to 150 W

Features

Automatic detection of USB or LSB. BFO can be used for tuning of

carrier for AM and FM radio’s.

OCCUPIED BANDWIDTH MEASUREMENT (OPTION 9)

Calculates the bandwidth of a signal displayed on the spectrum analyz-

er.

Frequency Range

1 MHz to 1 GHz

Display Resolution

3 digits

Accuracy

20%

Bandwidth Measurement Range

3 kHz minimum

Ratio range 90% - 99% selectable in 0.1% steps

NMT CELLULAR SOFTWARE (OPTION 10)

NMT 450

NMT 900

Benelux

NMTF

Austria

Spain

Malaysia

Indonesia

Saudi 1

Saudi 2

Thailand

Oman

Tunisia

Hungary

Poland

Russia

Czech

Bulgaria

Slovenia

Turkey

USER DEFINED NMT

AMPS CELLULAR SOFTWARE (OPTION 11)

E-AMPS

N-AMPS

USER DEFINED AMPS

TACS CELLULAR SOFTWARE (OPTION 12)

E-TACS

TACS 2

C-TACS I

C-TACS II

J-TACS

N-TACS

USER DEFINED TACS

MPT 1327 TRUNKING SOFTWARE (OPTION 13)

BAND III

JRC

UK WATER

HONG KONG

AUTONET

AMT

MADEIRA

NL-TRAXIS

NZ MPT1327

PH-INDO

USER DEFINED MPT

PMRTEST SOFTWARE (OPTION 14)

USER DEFINED PMR for FM radio’s

EDACS

™

™ RADIO TEST SOFTWARE (OPTION 15)

Provides Auto/Manual test capability for EDACS

™ radios. Up to 4 User

defined variants can be created and stored, each with up to 24 spot

channel frequencies.

EDACS

™

™ REPEATER TEST SOFTWARE (OPTION 16)

Provides Auto/Manual test capability for EDACS

™ repeaters. Up to 4

user defined variants can be created and stored, each with up to 24

spot channel frequencies. A data logging facility is also available to

continuously decode and display data messages from the repeater

under test.

EDACS is an Ericsson GE registered trademark. IFR is an EDACS

trunking licensee.

2948iss15.qxd

01/Dec/2004

10:07

Page 10