Micrel, Inc.

MIC2807

January 2007

5

M9999-013007-A

Notes:

1. Exceeding the absolute maximum rating may damage the device.

2. The device is not guaranteed to function outside its operating rating.

dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.

4. Devices are ESD sensitive. Handling precautions recommended.

5. Specification for packaged product only.

6. Regulation is measured at constant junction temperature using low duty cycle pulse testing, changes in output voltage due to heating effects are

covered by the thermal regulation specification.

7. Dropout voltage is defined as the input-to-output differential at which the output voltage drops 2% below its nominal value measured at 1V differential.

8. Ground pin current is the regulator quiescent current.