| 전자부품 데이터시트 검색엔진 |
|
TMPR4937 데이터시트(PDF) 330 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMPR4937 데이터시트(HTML) 330 Page - Toshiba Semiconductor |
|
330 / 552 page ![]() Chapter 10 PCI Controller 10-72 Bit Mnemonic Field Name Description Read/Write 10 SRST Software Reset Soft Reset (Default: 0x0) Performs PCI Controller software reset control. Data is also reloaded to the Configuration Space Register from EEPROM or from the Configuration Data Register. Please set this bit after the EEPROM Load End bit (PCICSTATUS.E2PDONE) is set. Also, please use the software to clear this bit at least four PCI Bus Clock cycles after Reset. Other registers of the PCI Controller cannot be accessed while this bit is set. This bit differs from the Hardware Reset bit (HRST). The following register values are not initialized. • G2P Status Register (G2PSTATUS) • PCI Bus Arbiter Status Register (PBASTATUS) • PCI Controller Status Register (PCICSTATUS) • Software Reset bit (PCICCFG.SRST) • Load Configuration Register bit (PCICCFG.LCFG) 1: The PCI Controller is reset by the software. 0: The PCI Controller is not reset by the software. R/W 9 IRBER Bus Error Response Setting During Initiator Read Initiator Read Bus Error Response (Default: 0x1) Bus error responses on the G-Bus are controlled when the following phenomena indicated by the PCI Status, Command Register (PICSTATUS) and the G2P Status Register (G2PSTATUS) occur during initiator Read access. Detected Parity Error (PCISTATUS.DPE) Received Master Abort (PCISTATUS.RMA) Received Target Abort (PCISTATUS.RTA) Initiator Detected TRDY Time Out Error (G2PSTATUS.IDTTOE) Initiator Detected Retry Time Out Error (G2PSTATUS.IDRTOE) 1: Responds with a Bus error on the G-Bus. 0: Does not respond with a Bus error on the G-Bus. (Normally terminates the Read transaction on the G-Bus. Read data is invalid.) R/W 8 G2PM0EN Initiator Memory Space 0 Enable Initiator Memory Space 0 Enable (Default: 0x0) Controls PCI initiator access to Memory Space 0. 1: Memory Space 0 is valid. 0: Memory Space 0 is invalid. R/W 7 G2PM1EN Initiator Memory Space 1 Enable Initiator Memory Space 1 Enable (Default: 0x0) Controls PCI initiator access to Memory Space 1. 1: Memory Space 1 is valid. 0: Memory Space 1 is invalid. R/W 6 G2PM2EN Initiator Memory Space 2 Enable Initiator Memory Space 2 Enable (Default: Normal Mode: 0x0; PCI Boot Mode: 0x1) Controls PCI initiator access to Memory Space 2. 1: Memory Space 2 is valid. 0: Memory Space 2 is invalid. R/W 5 G2PIOEN Initiator I/O Space Enable Initiator I/O Space Enable (Default: 0x0) Controls PCI initiator access to the I/O Space.. 1: I/O Space is valid. 0: I/O Space is invalid. R/W Figure 10.4.41 PCI Controller Configuration Register (2/3) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |