전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

AX2020 데이터시트(PDF) 8 Page - AXElite technology co. ltd

부품명 AX2020
상세설명  32V, 1A Step down High Brightness LED Driver with 5000:1 Dimming
PDF  12 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  AXELITE [AXElite technology co. ltd]
홈페이지  http://www.axelite.com.tw/
Logo AXELITE - AXElite technology co. ltd

AX2020 데이터시트(HTML) 8 Page - AXElite technology co. ltd

Back Button AX2020 Datasheet HTML 4Page - AXElite technology co. ltd AX2020 Datasheet HTML 5Page - AXElite technology co. ltd AX2020 Datasheet HTML 6Page - AXElite technology co. ltd AX2020 Datasheet HTML 7Page - AXElite technology co. ltd AX2020 Datasheet HTML 8Page - AXElite technology co. ltd AX2020 Datasheet HTML 9Page - AXElite technology co. ltd AX2020 Datasheet HTML 10Page - AXElite technology co. ltd AX2020 Datasheet HTML 11Page - AXElite technology co. ltd AX2020 Datasheet HTML 12Page - AXElite technology co. ltd  
Zoom Inzoom in Zoom Outzoom out
 8 / 12 page
background image
8/12
Axelite Confidential Materials, do not copy or distribute without written consent.
Rev.1.4 Sep.27, 2019
AX2020
Reducing output ripple
Peak to peak ripple current in the LED(s) can be reduced, if required, by shunting a
capacitor CLED across the LED(s) as shown below:
D
VIN
CSN
SW
GND
VIN
DIM
L
47uH
0.4
AX2020
CLED
1uF
CIN
4.7uF~100uF
A value of 1uF will reduce the supply ripple current by a factor three (approx.).
Proportionally lower ripple can be achieved with higher capacitor values. Note that the
capacitor will not affect operating frequency or efficiency, but it will increase start-up delay
and reduce the frequency of dimming, by reducing the rate of rise of LED voltage.
By adding this capacitor the current waveform through the LED(s) changes from a
triangular ramp to a more sinusoidal version without altering the mean current value.
Operation at low supply voltage
The internal regulator disables the drive to the switch until the supply has risen above
the startup threshold (VUVLO). Above this threshold, the device will start to for this reason, the
temperature coefficients of the operating. However, with the supply voltage below the
specified minimum value, the switch duty cycle will be high and the device power dissipation
will be at a maximum. Care should be taken to avoid operating the device under such
conditions in the application, in order to minimize the risk of exceeding the maximum allowed
die temperature. (See next section on thermal considerations). The drive to the switch is
turned off when the supply voltage falls below the under-voltage threshold (VUVLO-1V).
This prevents the switch working with excessive 'on' resistance under conditions where
the duty cycle is high.
Thermal shutdown protection
To ensure the reliability, the AX2020 is built with a thermal shutdown (TSD) protection
function. The TSD protests the IC from over temperature (150°C). When the chip
temperature decreases (115°C), the IC recovers again.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com