TMP86FS49AIUG datasheet(220/296 Pages) TOSHIBA

220 / 296 page

Page 204

16. Serial Bus Interface(I2C Bus) Ver.-D (SBI)

16.5 I2C Bus Control

TMP86FS49AIUG

When the AL is set to “1”, the MST and TRX are cleared to “0” and the mode is switched to a slave receiver

mode. Thus, the serial bus interface circuit stops output of clock pulses during data transfer after the AL is set

to “1”.

The AL is cleared to “0” by writing data to the SBIDBR, reading data from the SBIDBR or writing data to

the SBICRB.

Figure 16-8 Example of when a Serial Bus Interface Circuit is a Master B

16.5.11Slave address match detection monitor

In the slave mode, the AAS (Bit2 in SBISRB) is set to “1” when the received data is “GENERAL CALL” or

the received data matches the slave address setting by I2CAR with an address recognition mode (ALS = 0).

When a serial bus interface circuit operates in the free data format (ALS = 1), the AAS is set to “1” after

receiving the first 1-word of data.

The AAS is cleared to “0” by writing data to the SBIDBR or reading data from the SBIDBR.

16.5.12GENERAL CALL detection monitor

The AD0 (Bit1 in SBISRB) is set to “1” when all 8-bit received data is “0” immediately after a start condi-

tion in a slave mode. The AD0 is cleared to “0” when a start or stop condition is detected on a bus.

16.5.13Last received bit monitor

The SDA line value stored at the rising edge of the SCL line is set to the LRB (Bit0 in SBISRB). In the

acknowledge mode, immediately after an INTSBI interrupt request is generated, an acknowledge signal is read

by reading the contents of the LRB.

SCL pin

SDA pin

SCL pin

SDA pin

MST

TRX

D7A

D6A

D5A D4A

D7B

D6B

D3A D2A D1A

D6A’

D7A’

D5A’

D0A

Master A

Master B

Stop clock output

Releasing SDA pin and SCL pin to high level as losing arbitration.

5678

Accessed to SBIDBR or SBICRB

INTSBI

TMP86FS49AIUG 데이터시트(PDF) 220 Page - Toshiba Semiconductor

TMP86FS49AIUG 데이터시트(HTML) 220 Page - Toshiba Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL