KSZ9567R_V01 datasheet(120/233 Pages) MICROCHIP

120 / 233 page

KSZ9567R

DS00002329E-page 120

 2022 Microchip Technology Inc. and its subsidiaries

5.1.6.15

GPIO Status Monitor 0 Register

5.1.6.16

GPIO Status Monitor 1 Register

This register provides the interrupt status for the trigger output unit and timestamp units used with the GPIO. The GPIO

pin Output Trigger and Timestamp Unit interrupt status bit in the Global Interrupt Status Register is the OR of the status

bits in this register.

Address:

0x0524 - 0x0527

Size:

32 bits

Bits

Description

Type

Default

31:19

RESERVED

0x000

18:16

Event Trigger Output Error (TRIGGER_ERROR)

(Bit 18 = Trigger Unit 2, Bit 17 = Trigger Unit 1, Bit 16 = Trigger Unit 0)

1 = The event trigger time is set earlier than the system time clock when the

TRIGGER_NOTIFY bit is set to “1” in the Trigger Output Unit Control 1 Regis-

ter and will generate an interrupt to the host. This bit can be cleared by reset-

ting the TRIGGER_EN bit to “0” in the Timestamp Control and Status

0 = No event trigger error.

R/W1C

000b

15:3

RESERVED

0x000

2:0

Event Trigger Output Unit Done (TRIGGER_DONE)

(Bit 2 = Trigger Unit 2, Bit 1 = Trigger Unit 1, Bit 0 = Trigger Unit 0)

1 = The event trigger output unit has been generated when the TRIG-

GER_NOTIFY bit is set to “1” in the Trigger Output Unit Control 1 Register

(write “1” to clear this bit) and will generate an interrupt to the host.

0 = Event trigger output unit not done.

R/W1C

000b

Address:

0x0528 - 0x052B

Size:

32 bits

Bits

Description

Type

Default

31:19

RESERVED

0x0000

18:16

Trigger Output Unit Interrupt Status

(Bit 18 = Trigger Unit 2, Bit 17 = Trigger Unit 1, Bit 16 = Trigger Unit 0)

These three bits provide the interrupt status for the three Trigger Output

Units. These interrupts are enabled by setting the TRIGGER_NOTIFY bit in

the Trigger Output Unit Control 1 Register. This is done separately for each

TOU. Refer to the GPIO Status Monitor 0 Register for the Trigger Output Unit

status details.

1 = Interrupt detected

0 = No interrupt

R/WC

000b

15:2

RESERVED

0x0000

KSZ9567R 데이터시트(PDF) 120 Page - Microchip Technology

KSZ9567R 데이터시트(HTML) 120 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL