IL3085

8

NVE Corporation

11409 Valley View Road, Eden Prairie, MN 55344-3617

(952) 829-9217

www.nve.com

YouTube.com/NveCorporation

iso-apps@nve.com

Notes:

1.

All voltages are with respect to network ground except differential I/O bus voltages.

2.

Differential input/output voltage is measured at the noninverting terminal A with respect to the inverting terminal B.

3.

Δ|VOD| and Δ|VOC| are the changes in magnitude of VOD and VOC, respectively, that occur when the input is changed from one logic state to

the other.

4.

Includes 10 ns read enable time. Maximum propagation delay is 25 ns after read assertion.

5.

Pulse skew is defined as |tPLH – tPHL| of each channel.

6.

Absolute Maximum specifications mean the device will not be damaged if operated under these conditions. It does not guarantee

performance.

7.

The relevant test and measurement methods are given in the Electromagnetic Compatibility section on p. 9.

8.

External magnetic field immunity is improved by this factor if the field direction is “end-to-end” rather than to “pin-to-pin.”